User manual

Raisecom Technology Co., Ltd
8
3. Parameters
3.1. Fiber Optic Interface Specification
Bit rate: 100Mbps
Line code: 4B5B
Fiber connecter: SC (RC801-60B-FV35-S1 dual strand fiber port also has FC
type)
Model Type Transmission
Wavelength
(Nm )
Laser
Type
Receiver
Type
Launch
Power
(dBmW)
Over
Load
Point
(dBm)
Receiving
Sensitivity
(dBmW )
Typical
Transmission
Distance
(Km)
RC801-60B-FV35-S1 1310 FP PIN -15,-8 >-8 <-34 0-25
RC801-60B-FV35-S2 1310 FP PIN -5,0 >-8 <-34 10-60
RC801-60B-FV35-S3 1550 DFB PIN -5,0 >-10 <-36 15-120
RC803-60B-FV35-S1 1310 FP PIN -12,-3 >-8 <-30 0-25
RC805-60B-FV35-S1 1550 DFB PIN -12,-3 >-8 <-30 0-25
RC803-60B-FV35-S2 1310 FP PIN -5,0 >-8 <-32 10-50
RC805-60B-FV35-S2 1550 DFB PIN -5,0 >-8 <-32 10-50
3.2. V.35 Interface Specification
Physical Characteristics: Complies with V.35 interface standard of ITU suggestions
Connector Type: ISO2593 female connector (M 34 interface)
Working Mode: DCE (support cross connection with other DCE device)
Interface Bit Rate: V.35 interface bit rate is N×64Kbps（N=1-31）at E1 fractional
mode;
V.35 interface bit rate is 2048Kbps at E1 transparent mode
3.3. E1 Interface Specification
Electric Characteristic: Complies with ITU-T G.703 Suggestion
Other Characteristic: Fault pass, jitter capability complies with ITU-T G.823, G.724
and related suggestion
Interface type: 75Ω unbalanced BNC connector (default)
120Ω balanced RJ45 connector (configured by dip-switch on
the bottom of the device)
Bit rate: 2048Kbps±50ppm