User manual

Raisecom Technology Co., Ltd
7
3. Parameters
3.1. V.35 Interface Specification
Physical Characteristics: Complies with V.35 interface standard of ITU suggestions
Connector Type: ISO2593 female connector (M 34 interface)
Working Mode: DCE (support cross connection with other DCE device)
Interface Bit Rate: V.35 interface bit rate is N×64Kbps（N=1~31）at E1 fractional
mode;
V.35 interface bit rate is 2048Kbps at E1 transparent mode
3.2. Fiber Optic Interface Specification
Bit rate: 100Mbps
Line code: 4B5B
Fiber connecter: SC
Model Type Transmission
Wavelength
(Nm )
Laser
Type
Receiver
Type
Launch
Power
(dBmW)
Over
Load
Point
(dBm)
Receiving
Sensitivity
(dBmW )
Typical
Transmission
Distance
(Km)
RC801-30B-FV35-S1 1310 FP PIN -15,-8 >-8 <-34 0-25
RC801-30B-FV35-S2 1310 FP PIN -5,0 >-8 <-34 10-60
RC801-30B-FV35-S3 1550 DFB PIN -5,0 >-10 <-36 15-120
RC803-30B-FV35-S1 1310 FP PIN -12,-3 >-8 <-30 0-25
RC805-30B-FV35-S1 1550 DFB PIN -12,-3 >-8 <-30 10-50
RC803-30B-FV35-S2 1310 FP PIN -5,0 >-8 <-32 0-25
RC805-30B-FV35-S2 1550 DFB PIN -5,0 >-8 <-32 10-50
3.3. Cable Type
When connect this series product with DTE equipments such as routers through M34
interface, please use the special DTE router cable. When the cable is not long enough
please order the extended cable CBL-V35-M34M/M34F-D from Raisecom (in Appendix).
When connecting this series product with other DCE equipments, the cross cable
CBL-V35-M34M/M34M-X-D is necessary, and please order it from Raisecom (in
Appendix).