User manual

Beijing Raisecom Science & Technology Co., Ltd.

http://www.raisecom.com

- 7 -

2.2.1 Point-to-point Fractional Mode, ‘Master Clock – Slave

Clock’ Topology

When connecting Routers or other V.35 interface equipment point to point, Routers shall work as

DTE. For the convenience of installation and test, it is advised to set the local modem ‘Master

Clock Mode’, and remote modem ‘Slave Clock Mode’. That is, the timing resource is from the

local modem.

RC802-30B-FV35 RC801-30B-FV35

Optical

Fiber

Router

V.35 DTE wire

Master Clock

(Timing Resource)

Slave Clock

2.2.2 Point-to-point Fractional Mode, ‘Terminal Clock –

Slave Clock’ Topology

When the remote DTE must follow the timing resource of local DTE (the TX Clock is Internal

Clock in local DTE), it is advised to set the local RC802-30B-FV35 Terminal Clock, and remote

RC801-30B-FV35 Slave Clock Mode.

RC802-30B-FV35 RC801-30B-FV35

Optical

Fiber

Router

V.35 DTE wire

Terminal Clock

Slave Clock

(Timing Resource)

2.2.3 Point-to-point Transparent Mode, ‘Master Clock –

Master Clock’ Topology

When working at Transparent E1 Mode, both sides equipment can be set to Master Clock Mode.