Datasheet

6
WWW.RAISE3D.COM
AMERICA · ASIA · EUROPE
Raise3D Premium PVA+_SDS
June.2021 Version 1.1
temperatures, use suitable respiratory equipment with combined filter for organic gases and particles
(type A2P2 or comparable).
Hand protection: Rubber gloves
Eye protection: Goggles
Skin and body protection: Apron
Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice. General industrial hygiene
practice. Do not breathe dust. Avoid contact with skin, eyes and clothing. When using do not eat, drink or
smoke. Wash hands before breaks and at the end of workday. Wash contaminated clothing before re-
use.
Environmental exposure controls:
no data available
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Appearance: Solid Filament
Odour: Sligth vinegar
Colour: Yellow to pale yellow
Odour threshold: No information available
pH: 5.0-7.0
Melting/freezing point: 150-230 °C / -
Initial boiling point and boiling range: Not applicable
Flash point: >200 °C
Evaporation rate: Not applicable
Flammability (solid, gas): No information available
Upper/lower flammability or explosive limits
UEL: No data available
LEL: 35 g/m3
Vapour pressure: Not applicable
Vapour density: Not applicable
Relative density: 1.19 – 1.31 g/cm3
Solubility(ies): Unlimited solubility 100.00 g/L
Partition coefficient (n-octanol/water): Not available
Auto-ignition temperature: 520 °C
Decomposition temperature: >=200 °C