Raise3D Premium PVA+_SDS June.2021 Version 1.1 Raise3D Premium PVA+ Safety Data Sheet Section 1: PRODUCT AND COMPANY IDENTIFICATION 1.1 Trade name: Raise3D Premium PVA+ 3D Printing Filament 1.2 Use of the product: 3D Printer Filament 1.3 Supplier information Supplier: Raise 3D Technologies, Inc. Address: 43 Tesla, Irvine, CA 92618 Emergency phone number: In case of toxicological emergency, contact your doctor. Section 2: HAZARDS IDENTIFICATION 2.
Raise3D Premium PVA+_SDS June.2021 Version 1.1 Section 3: COMPOSITION / INFORMATION ON INGREDIENTS Mixtures Chemical Name % Cas No./EC No Polyvinyl Alcohol Compound >96 - Aliphatic polyol <20 - Calcium distearate <2 1592-23-0 Methanol (impurity)* <1 67-56-1 200-659-6 *Classification: Flam. Liq. 2; H225, Acute Tox. 3; H301, Acute Tox. 3; H311, Acute Tox. 3; H331, STOT SE 1; H370 Section 4: FIRST AID MEASURES 4.1 Description of first aid measures 4.1.
Raise3D Premium PVA+_SDS June.2021 Version 1.1 no data available. Section 5: FIRE FIGHTING MEASURES 5.1 Extinguishing media Suitable extinguishing media: Water fog, Dry chemical Unsuitable extinguishing media: Do not use a solid water stream as it may scatter and spread fire. 5.2 Special hazards arising from the substance or mixture Specific hazards during firefighting: Do not use a solid water stream as it may scatter and spread fire. Exposure to decomposition products may be a hazard to health. 5.
Raise3D Premium PVA+_SDS June.2021 Version 1.1 Section 7: HANDING AND STORAGE 7.1 Handling Advice on safe handling: For personal protection see section 8. Avoid creating dust. Do not breathe dust. Avoid contact with skin and eyes. Advice on protection against fire and explosion: Normal measures for preventive fire protection. Dust explosion class: No data available. 7.
Raise3D Premium PVA+_SDS June.2021 Version 1.1 Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION 8.1 Control parameters Components CAS No. Type Value Methanol (impurity) 67-56-1 STEL 333 mg/m3 Detail 250 ppm TWA: 266 mg/m3 200 ppm Aliphatic polyol - PEL 5 mg/m3 Respirable 15 mg/m3 fraction. Total dust. Dust - PEL 5 mg/m3 Respirable 15 mg/m3 fraction. Total dust. 8.2 Exposure controls Use local exhaust ventilation to maintain airborne concentrations below the TLV.
Raise3D Premium PVA+_SDS June.2021 Version 1.1 temperatures, use suitable respiratory equipment with combined filter for organic gases and particles (type A2P2 or comparable). Hand protection: Rubber gloves Eye protection: Goggles Skin and body protection: Apron Hygiene measures: Handle in accordance with good industrial hygiene and safety practice. General industrial hygiene practice. Do not breathe dust. Avoid contact with skin, eyes and clothing. When using do not eat, drink or smoke.
Raise3D Premium PVA+_SDS June.2021 Version 1.1 Viscosity: Not applicable Explosive properties: Dust explosion risk at fine dust Oxidizing properties: Oxidizing potential: not oxidizing Section 10: STABILITY AND REACTIVITY 10.1 Reactivity: The product is stable and non-reactive under normal conditions of use, storage and transport. 10.2 Chemical stability: Stable under recommended storage conditions. 10.3 Possibility of hazardous reactions: No decomposition if stored and applied as directed.
Raise3D Premium PVA+_SDS June.2021 Version 1.
Raise3D Premium PVA+_SDS June.2021 Version 1.1 12.1 Toxicity The product is not classified as environmentally hazardous. Components: Test results Methanol (Impurity)(67-56-1) EC50 Algae: 22000 mg/l 96 hours EC50 Daphnia magna: > 10000mgl/48 hours LC50 Fish: 15400 mg/l 96 hours 12.2 Persistence and degradability No data is available on the degradability. 12.3 Bioaccumulative potential No data available. 12.4 Mobility in soil No data available. 12.5 Other adverse effects No data available. 12.
Raise3D Premium PVA+_SDS June.2021 Version 1.1 14.2 UN proper shipping name Not applicable. 14.3 Transport hazard class(es) Not applicable. 14.4 Packing Group Not applicable. 14.5 Environmental hazards No additional data is available. 14.6 Special precautions for user No data available. 14.7 Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code Not evaluated. Section 15: REGULATORY INFORMATION 15.
Raise3D Premium PVA+_SDS June.2021 Version 1.1 This safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006 and Regulation (EC) No. 2015/830. Label element according to Regulation (EC) No 1272/2008. The information above is believed to be accurate and represents the best information currently available to us.
