Instructions

Raise3D E2_Quick Start Guide
www.raise3d.com
- 12 -
⚫ Hardware Installation and First Print
Use hands to remove the Z-axis and X-axis locks.
Please carefully store the removed locks, so that
they can be installed again and used in
subsequent transportation.
The top foam contains five power cords of
different standards. Please use the power cord
that conforms to your current country (or region)
and connect it to the power socket. Turn on the
switch and start the device.
Turn on the power and the printer will enter the
boot process. Your Raise3D printer will take about
60 seconds to boot. When the touch screen
displays the "Welcome" window, the printer is
ready. Then you can finish the installation and
first print according to the Setup guide.