User manual

ENGLISH RAIS - Manual for RONDO & MINO II

Light the re and shut the

door, leaving the door ajar

approx. 10-15 mm.

Lighting and fuelling

TIPS before ring up:

Open a door or window close to the wood burn-

ing stove.

If there is a “storm” in the stove coming from the

chimney, it is advisable to place a screwed-up

piece of newspaper between the upper bae

plate and the chimney, set the paper on re,

and wait until you hear a “rumbling” noise in the

chimney. This means that there denitely is a

draught in the chimney and you avoid smoke in

the room.

To light the stove, use alcohol briquettes or similar,

as well as approx. 2 kg of rewood, split into kin-

dling sticks. Set the air damper to the fully open

position.

When the ames are clear - after approx. 5-10 min.

- close the door.

Damper - see adjustment of air damper.

After approx. 10-20 min. - when you have a good

bed of glowing embers - add 2-3 pieces of wood.

Leave the door ajar until the re has caught on

properly - close the door.

Damper - see adjustment of air damper.

After approx. 5 min. - or when the ames are clear

and stable - close the damper gradually.

It is recommendable to have a layer of ash of ap-

prox. 20 mm, as it has an insulating eect.

Note!

During operation the

door should always

remain shut.