Installation guide

FCServlet Diagnostic
FlashCONNECT Administrator’s Guide 83
Viewing the FCServlet Diagnostic Report
After running tests, view the test report that describes the test results.
To view the report:
1. Click View Report from the FCServlet Diagnostic dialog box.
The FCServlet Diagnostic Report displays.
2. Do one of the following:
• Click Save to save the report. Enter the file name for the report, then click
OK.
• Click Open to view a report previously saved on the system or, click Browse
to locate the file, then click OK.
• Click Reset to clear the report without saving the results.
• Click Exit to close the report and return to the FCServlet Diagnostic dialog
box without saving the test results.
Reconfiguring FCServlet Diagnostic Parameters
You can reconfigure the parameters to reflect the current setup of FCServlet on the
system.