Installation guide

Using the FlashCONNECT Socket Server Manager
FlashCONNECT Administrator’s Guide 63
The Start FCSocket Server dialog box displays.
2. Type the port number, then click OK.
Stopping FlashCONNECT Socket Servers
If you have multiple FlashCONNECT socket server ports, you can stop a connection
at any time using the FlashCONNECT Socket Server Manager.
To stop a FlashCONNECT Socket Server:
Windows and UNIX:
1. Click Stop Server from the FlashCONNECT Socket Server dialog box.
The Stop FCSocket Server dialog box displays.
2. Type the port number of the socket server that you want to stop.
3. Click OK.
To Stop all FlashCONNECT Socket Servers and close the
FlashCONNECT Socket Server Manager:
Windows:
Do one of the following:
• Double-click FlashCONNECT Socket Server from Services (located in the control
panel) to open the Properties dialog box. Click Stop.
NOTE—The TCP/IP Port number range is 1025-65535. Click Reset to return to the
initial port number.