Installation guide

Using Server Pools
FlashCONNECT Administrator’s Guide 41
For example, to start ten connections in the GAME server pool on
www.rainingdatagames.com (assuming that www.rainingdatagames.com has a Web
server and FlashCONNECT service running on it), use this command:
WWW-START 10 WWW.RAININGDATAGAMES.COM 1505 GAME
Stopping Server Pools in Groups or Individual Lines
Manually
To stop server pools in groups:
When stopping FlashCONNECT with WWW-MANAGER, WWW-MANAGER stops the
w3Monitor and then uses WWW-STOP to shut down each configured server pool.
Occasionally, it is necessary to manually start and stop both the w3Monitor and
FlashCONNECT connections. This process stops the w3Monitor from the
configuration file.
To stop individual lines or server pools:
Use the WWW-STOP command from the www account to stop FlashCONNECT
connections.
WWW-STOP [SERVER-POOL|DATABASE LINE] {(OPTIONS}
where
POOLNAME Server pool name of this set of FlashCONNECT servers. The name
is case-sensitive. If left blank, these servers are added to the
default pool.
SERVER-POOL Name of server pool to stop.
DATABASE LINE Database line to stop that is running FlashCONNECT (Port).
OPTIONS
F Forces the database server to disconnect and closes
sockets when WWW-STOP fails, (possibly because all
FlashCONNECT lines are in use). Only stopped lines are
impacted.
Q Stops all lines in the server pool, stops those connected
to this database.
NOTE—If WWW-STOP is issued with neither a PORT or a POOLNAME specified, no
action is taken