Installation Guide

866-905-7625 | Tech@RAINGLER.com | Raingler.com
Toyota Tacoma Double/Crew Cab Barrier &
Ceiling Nets
(supplemental installation notes)
NOTE: Many newer models have B-pillar handles and even overhead on the ceiling that can be used for some of the top
mounting locations. Check to see if you prefer to use these factory locations as the nets typically have enough adjustment
to allow for this option. If your vehicle does not have handles in desired locations or you prefer to install mounting points for
better fitment, please follow the below steps.
IMPORTANT: USE THESE INSTRUCTIONS AS A SUPPLEMENT
TO OUR INSTRUCTIONAL VIDEOS AND DOCUMENTS FOR TACOMA
Time: About 30-45 minutes
Paw Level:
Tools: (may vary by vehicle)
1. Ratchet
2. Panel Removal Tool
3. 13/64” drill bit
4. Touch up paint or clear nail polish

Summary of content (3 pages)