User Manual
WE865-DUAL Product Description 
80312ST10046A Rev. 1 - 03/10/08  
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved    page 18 of 22 
6  Conformity assessment issues 
Assessment of the final product must be made against the Essential requirements of the R&TTE 
Directive Articles 3.1(a) and (b), safety and EMC respectively, and any relevant Article 3.3 
requirements. 
The WE865-DUAL module is conform with the following European Union Directives: 
•  R&TTE Directive 1999/5/EC (Radio Equipment & Telecommunications Terminal Equipments) 
•  Low Voltage Directive 73/23/EEC and product safety 
•  Directive 89/336/EEC for conformity for EMC 
In order to satisfy the essential requisite of the R&TTE 99/5/EC directive, the WE865-DUAL module is 
compliant with the following standards: 
•  Use of RF Spectrum. Standard: EN 300 328 v1.7.1 (2006-10) 
•  EMC (Electromagnetic Compatibility). Standards: EN 301 489-1 and EN 301 489-17 
•  LVD (Low Voltage Directive) Standards: EN 60 950 
The WE865-DUAL module is conform with the following US Directives: 
•  Use of RF Spectrum: Standards: FCC 47 Part 15 
•  EMC (Electromagnetic Compatibility). Standards: FCC 47 Part 15 
To meet the FCC's RF exposure rules and regulations: 
-  The system antenna(s) used for this transmitter must be installed to provide a separation 
distance of at least 20 cm from all the persons and must not be co-located or operating in 
conjunction with any other antenna or transmitter. 
-  The system antenna(s) used for this module must not exceed 2 dBi for all operating 
configurations. 
-  Users and installers must be provided with antenna installation instructions and transmitter 
operating conditions for satisfying RF exposure compliance. 
Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify 
any regulatory questions and to have their complete product tested and approved for FCC 
compliance. 










