Instruction Manual

Preliminary W79E8213/W79E8213R Data Sheet
Publication Release Date: July 11, 2008
- 53 - Revision A2
11. RESET CONDITIONS
The user has several hardware related options for placing the W79E8213 series into reset condition.
In general, most register bits go to their reset value irrespective of the reset condition, but there are a
few flags whose state depends on the source of reset. The user can use these flags to determine the
cause of reset using software.
11.1 Sources of reset
Figure 11-1: Reset and Vdd monitor timing diagram, disable /RST pin.