Instruction Manual
Preliminary W79E8213/W79E8213R Data Sheet 
Publication Release Date: July 11, 2008 
 - 5 -  Revision A2 
2. FEATURES 
z  Fully static design 8-bit 4T-8051 CMOS microcontroller: 
  VDD = 4.5V to 5.5V @20MHz 
  VDD = 2.7V to 5.5V @12MHz 
  VDD = 2.4V to 5.5V @4MHz 
z  Instruction-set compatible with MSC-51. 
z  Flexible CPU clock source configurable by config bit and software: 
  High speed external oscillator: upto 20MHz Crystal and resonator (enabled by config bit). 
  Internal RC oscillator: 20/10MHz selectable by config bit, only W79E8213R supports ±2% 
accuracy internal RC oscillator at fixed voltage and temperature condition. 
z  4K bytes of AP Flash EPROM, with ICP and external writer programmable mode. 
z  128 bytes of on-chip RAM. 
z  W79E8213 series supports 128 bytes NVM Data Flash EPROM for customer data storage used 
and 10K writer cycles. 
  8 pages. Page size is 16 bytes. 
z  Two 16-bit timer/counters. 
z  Ten interrupts source with four levels of priority. 
z  Three-edge detect interrupt inputs. 
z  Programmable Watchdog Timer. 
z  Four-channel 10-bit PWM (Pulse Width Modulator). 
z  Internal square wave generator for buzzer. 
z  Up to 18 I/O pins. 
z  The 4 outputs mode and TTL/Schmitt trigger selectable Port. 
z  LED drive capability (20mA) on all port pins. Sink 20mA; Drive: -15~-20mA @push-pull mode. 
z  Eight high sink capability (40mA) port pins. 
z  Eight-channel multiplexed with 10-bits A/D convert. 
z  Low Voltage Detect interrupt and reset. 
z Development Tools: 
  ICP(In Circuit Programming) writer 
z Packages: 
- Lead Free (RoHS) DIP 20:  W79E8213AKG 
- Lead Free (RoHS) SOP 20:  W79E8213ASG 
- Lead Free (RoHS) DIP 20:  W79E8213RAKG 
- Lead Free (RoHS) SOP 20:  W79E8213RASG 










