Owner's manual

UC864-E/G Product Description

80281ST10034a Rev. 1 - 08/08/2008

1 Overview

The Telit UC864-E/G module are small, lightweight, low power consumption and RoHS compliant

devices that allow digital communication services wherever a WCDMA/HSDPA (850 ,1900 and 2100

MHz for UC864-G and only 2100 MHz for UC864-E), GSM 850, 900, DCS 1800 or PCS 1900 network

is present with additional options like an integrated GPS receiver (in UC864-G only).

The UC864-E/G is a low cost connector-less best solution for medium to high quantity projects.

The UC864-E/G is provided with an 80 pin Molex board to board connector and a 50 Ohm Murata RF

connector. The UC 864-G is still provided with an additional 50 Ohm Murata RF connector for GPS

receiver.

The UC864-E/G module includes features like GPRS/EDGE CLASS 12, Voice, Circuit Switched Data

transfer, Fax, Phonebook and SMS support, embedded TCP/IP stack and battery charging

capabilities.

The UC864-E/G is specifically designed and developed by Telit for OEM usage and dedicated to

portable data, voice and telemetric applications such as:

• Telemetry and Telecontrol (SCADA applications)

• Security systems

• Automated Meter Reading (AMR)

• Vending machines

• POS terminals

• PDAs and Mobile Computing

• Phones and Payphones

• Automotive and Fleet Management applications

• Battery powered applications needing a battery charger

• Return channel for digital broadcasting

• Position reporting and tracking with integrated GPS

The UC864-E/G supports the following functionalities

• EASY GPRS (AT driven embedded TCP/IP protocol stack)

• EASY SCAN (full GSM frequency scanning)

From the interface point of view, the UC864-E/G provides the following:

• USB2.0 for AT commands

- Baud rate up to 12 Mbps

• Full RS232 UART, CMOS level (ASC0) interface for AT commands: