Owner's manual

UC864-E/G Product Description
80281ST10034a Rev. 1 - 08/08/2008
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 29 of 36
5 AT Commands
The Telit UC864-E/G module can be driven via the serial interface using the standard AT
commands
1
.
The Telit UC864-E/G module is compliant with:
1. Hayes standard AT command set, in order to maintain the compatibility with existing SW
programs.
2. 3gpp TS 27.007 specific AT command and WCDMA/GPRS specific commands.
3. 3gpp TS 27.005 specific AT commands for SMS (Short Message Service) and CBS (Cell
Broadcast Service)
4. FAX Class 1 compatible commands
Moreover the Telit UC864-E/G module supports also Telit proprietary AT commands for special
purposes.
For a more information about AT commands supported by UC864-E/G modules please refer to
document AT Commands Reference Guide, code 80304ST10041a.
1
The AT is an ATTENTION command and is used as a prefix to other parameters in a string. The AT command
combined with other parameters can be set up in the communications package or typed in manually as a
command line instruction.