User guide

6
TH7813A/TH7814A
1990A–IMAGE–05/02
Figure 6. Exposure Time Reduction
Electro-optical
Performance
• General test conditions:
T
CASE
=25°C
Light source: 2854K with 2 mm BG38 filter (unless specified) + F/11 optical aperture.
Typical operating conditions: 2 x 10 MHz
All values are referred to prescan pixels level.
Φ
A
P
Φ
L1
Φ
L2
Φ
R
Φ
Line Peri
od
Transfer Peri
od
exposure tim
e
≥
100 ns
Parameter Symbol
Value
Unit RemarksMin Typ Max
Saturation Output Voltage V
SAT
1.65 2 3 V
Responsivity R 7.5 8.5 V/µJ/cm
2
Responsivity Unbalance 2 5 %
Photo Response Non Uniformity Peak-to-peak PRNU ±5 ±10 %V
OS
V
OS
=50mVto1.5V
Dark Signal DS 0.1 0.4 mV/ms
Dark Signal Non Uniformity (1σ) DSNU 0.1 mV/ms
Temporal RMS Noise in Darkness V
N
300 µV
Dynamic Range DR 5,500 6,600
CTF CTF 65 %
LAG LAG 1 %
Charge Transfer Inefficiency (per stage) HCTI 8.10
-5