Manual
Table Of Contents
- 1 GENERAL DESCRIPTION
- 2 FEATURES
- 3 PARTS INFORMATION LIST AND PIN CONFIGURATION
- 4 BLOCK DIAGRAM
- 5 FUNCTIONAL DESCRIPTION
- 5.1 ARM® Cortex™-M0 core
- 5.2 System Manager
- 5.3 Clock Controller
- 5.4 USB Device Controller
- 5.5 General Purpose I/O
- 5.6 I2C Serial Interface Controller (Master/Slave)
- 5.7 PWM Generator and Capture Timer
- 5.8 Real Time Clock (RTC)
- 5.9 Serial Peripheral Interface (SPI) Controller
- 5.10 Timer Controller
- 5.11 Watchdog Timer
- 5.12 UART Interface Controller
- 5.13 Controller Area Network (CAN Bus)
- 5.14 PS2 Device Controller (PS2D)
- 5.15 I2S Controller
- 5.16 Analog-to-Digital Converter (ADC)
- 5.17 Analog Comparator
- 5.18 PDMA Controller
- 6 FLASH MEMORY CONTROLLER (FMC)
- 7 ELECTRICAL CHARACTERISTICS
- 7.1 Absolute Maximum Ratings
- 7.2 DC Electrical Characteristics
- 7.3 AC Electrical Characteristics
- 7.4 Analog Characteristics
- 7.4.1 Specification of 12-bit SARADC
- 7.4.2 Specification of LDO & Power management
- 7.4.3 Specification of Low Voltage Reset
- 7.4.4 Specification of Brownout Detector
- 7.4.5 Specification of Power-On Reset (5V)
- 7.4.6 Specification of Temperature Sensor
- 7.4.7 Specification of Comparator
- 7.4.8 Specification of USB PHY
- 8 PACKAGE DIMENSIONS
- 9 REVISION HISTORY
NUC140 Series DATA SHEET
Publication Release Date: May 31, 2010
- 9 - Revision V1.02
• ADC
– 12-bit SAR ADC with 800ksps
– Up to 8-ch single-end mode or 4-ch differential mode
– Single scan/single cycle scan/continuous scan
– Each channel with individual result register
– Scan on enabled channels
– Threshold voltage detection
– Conversion start by S/W, external pins
– Support PDMA Mode
• Analog Comparator
– 2 comparator analog modules
– External input or internal bandgap voltage selectable at negative node
– Interrupt when compare result change
– Power down wake up
• One built-in temperature sensor with 1℃ resolution.
• Brown-out detector
– With 4 levels: 4.5V/3.8V/2.7V/2.4V
– Support Brownout Interrupt and Reset option
• One built-in LDO
• Low Voltage Reset
• Operating Temperature: -40℃~85℃
• Packages:
– All Green package (RoHS)
LQFP 100-pin / 64-pin / 48-pin