Manual
Table Of Contents
- 1 GENERAL DESCRIPTION
- 2 FEATURES
- 3 PARTS INFORMATION LIST AND PIN CONFIGURATION
- 4 BLOCK DIAGRAM
- 5 FUNCTIONAL DESCRIPTION
- 5.1 ARM® Cortex™-M0 core
- 5.2 System Manager
- 5.3 Clock Controller
- 5.4 USB Device Controller
- 5.5 General Purpose I/O
- 5.6 I2C Serial Interface Controller (Master/Slave)
- 5.7 PWM Generator and Capture Timer
- 5.8 Real Time Clock (RTC)
- 5.9 Serial Peripheral Interface (SPI) Controller
- 5.10 Timer Controller
- 5.11 Watchdog Timer
- 5.12 UART Interface Controller
- 5.13 Controller Area Network (CAN Bus)
- 5.14 PS2 Device Controller (PS2D)
- 5.15 I2S Controller
- 5.16 Analog-to-Digital Converter (ADC)
- 5.17 Analog Comparator
- 5.18 PDMA Controller
- 6 FLASH MEMORY CONTROLLER (FMC)
- 7 ELECTRICAL CHARACTERISTICS
- 7.1 Absolute Maximum Ratings
- 7.2 DC Electrical Characteristics
- 7.3 AC Electrical Characteristics
- 7.4 Analog Characteristics
- 7.4.1 Specification of 12-bit SARADC
- 7.4.2 Specification of LDO & Power management
- 7.4.3 Specification of Low Voltage Reset
- 7.4.4 Specification of Brownout Detector
- 7.4.5 Specification of Power-On Reset (5V)
- 7.4.6 Specification of Temperature Sensor
- 7.4.7 Specification of Comparator
- 7.4.8 Specification of USB PHY
- 8 PACKAGE DIMENSIONS
- 9 REVISION HISTORY
NUC140 Series DATA SHEET
Publication Release Date: May 31, 2010
- 41 - Revision V1.02
5.7.2 Features
5.7.2.1 PWM function features:
y Four PWM Generators, each one supports one 8-bit prescaler, one clock divider, PWM-timer,
one dead-zone generator and two PWM outputs.
y Up to 8 PWM channels or 4 PWM paired channels.
y Up to 16 bits resolution.
y PWM Interrupt request synchronous with PWM period.
y Single-shot or Continuous mode PWM.
y Four Dead-Zone generators
5.7.2.2 Capture Function Features:
y Timing control logic shared with PWM Generators.
y 8 Capture input channels.
y Each channel support one rising latch register (CRLR), one falling latch register (CFLR) and
Capture interrupt flag (CAPIFx)