Instruction Manual

NUC130 Series DATA SHEET
Publication Release Date: May 31, 2010
- 63 - Revision V1.02
7.4.2 Specification of LDO & Power management
PARAMETER MIN TYP MAX UNIT NOTE
Input Voltage 2.7 5 5.5 V V
DD
input voltage
Output Voltage
(bypass=0)
-10% 2.45 +10% V LDO output voltage
Output Voltage
(bypass=1)
-10% Input
Voltage
+10% V Input Voltage < 2.7V
Temperature -40 25 85 oC
Quiescent Current
(PD=0, bypass=0)
- 100 - uA
Quiescent Current
(PD=1, bypass=0)
- 5 - uA
Quiescent Current
(PD=1, bypass=1)
- 5 - uA
Iload (PD=0) - - 100 mA
Iload (PD=1) - - 100 uA
Cbp - 1u - F Resr=1ohm
Cload - 250p - F
Note:
1. It is recommended that a 10uF or higher capacitor and a 100nF bypass capacitor are connected
between VDD and the closest VSS pin of the device.
2. For ensuring power stability, a 4.7uF or higher capacitor must be connected between LDO pin
and the closest VSS pin of the device. Also a 100nF bypass capacitor between LDO and VSS
help suppressing output noise.