Instruction Manual

NUC130 Series DATA SHEET
Publication Release Date: May 31, 2010
- 46 - Revision V1.02
5.11.2 Features of UART controller
z The UART control supports three channels, UART0, UART1 and UART2.
z UART0/UART1/UART2 supports 64/16/16 bytes entry FIFO for received and transmitted data
payloads.
z Auto flow control/flow control function (/CTS, /RTS) are supported in UART0 and UART1.
z Individual programmable baud-rate generator for each channel.
z Fully programmable serial-interface characteristics:
 5-, 6-, 7-, or 8-bit character.
 Even, odd, or no-parity bit generation and detection.
 1-, 1&1/2, or 2-stop bit generation.
 Baud rate generation.
 False start bit detection.
z Support IrDA SIR Function.
z Support LIN master mode.