Owner manual

ManualsBrandsRainbow Electronics ManualsReceivers and AmplifiersMXL1116

_______________General Description

The Maxim MXL1016 (10ns typ) and MXL1116 (12ns

typ) high-speed, complementary-output comparators

are designed specifically to interface directly to TTL

logic while operating from either a dual ±5V supply or a

single +5V supply.

The MXL1016/MXL1116 remain stable with the outputs

in the active region, which greatly reduces output insta-

bility common with slow-moving input signals. In addi-

tion, an output latch (LE) is provided.

For lower-power, higher-performance comparators, see

the MAX912/MAX913 dual/single comparator data

sheet. The MAX913 is an improved, plug-in replace-

ment for the MXL1016 and MXL1116, and the MAX912

is the dual equivalent to the MAX913.

________________________Applications

High-Speed A/D Converters

Zero-Crossing Detectors

Current Sense for Switching Regulators

High-Speed Sampling Circuits

High-Speed Triggers

Line Receivers

Extended Range V/F Converters

Fast Pulse Height/Width Discriminators

____________________________Features

♦ Ultra Fast (10ns typ)

♦ Single +5V or Dual ±5V Supply Operation

♦ Input Common-Mode Extends to

Negative Supply (MXL1116)

♦ Inputs Can Exceed the Positive Supply

Up to +15V (MXL1116) Without Damage

♦ Complementary TTL Outputs

♦ Low Offset Voltage: 1mV

♦ No Minimum Input Slew-Rate Requirement

♦ No Power-Supply Current Spiking

♦ Output Latch

______________Ordering Information

MXL1016/MXL1116

Ultra-Fast Precision TTL Comparators

________________________________________________________________

Maxim Integrated Products

V+

IN+

IN–

V–

QOUT

GND

DIP/SO

MXL1016/MXL1116

__________________Pin Configuration

_____________________Pin Description

Call toll free 1-800-998-8800 for free samples or literature.

19-0138; Rev. 2; 4/95

PART TEMP. RANGE PIN-PACKAGE

MXL1016CN8

0°C to +70°C 8 Plastic DIP

MXL1016CS8 0°C to +70°C 8 SO

MXL1016MJ8 –55°C to +125°C 8 CERDIP

MXL1116CN8

0°C to +70°C 8 Plastic DIP

MXL1116CS8 0°C to +70°C 8 SO

TOP VIEW

PIN NAME FUNCTION

1 V+ Positive Power Supply, +5V

2 IN+ Noninverting Input

3 IN- Inverting Input

4 V-

Negative Power Supply, -5V for dual

supply or GND for single supply

5 LE

Latch Enable, QOUT and QOUT are

latched when LE is high

6 GND Ground

7 QOUT TTL Output

8 QOUT Complementary TTL Output

Summary of content (4 pages)

PAGE 1
9-0138; Rev.
PAGE 2
MXL1016/MXL1116 Ultra-Fast Precision TTL Comparators ABSOLUTE MAXIMUM RATINGS Positive Supply Voltage............................................................7V Negative Supply Voltage........................................................–7V Differential Input Voltage MXL1016............................................................................±5V MXL1116..........................................................................±15V Input Voltage (either input) MXL1016 ...........................
PAGE 3
Ultra-Fast Precision TTL Comparators (V+ = 5V, V– = –5V, VOUT (Q) = 1.4V, VLE = 0V, TA = TMIN to TMAX, unless otherwise noted. Specifications for VOS, IB, CMRR and AV are valid for single-supply operation, V+ = 5V, V– = 0V.) PARAMETER Input Offset Voltage (Note 1) Input Offset-Voltage Drift Input Offset Current (Note 1) Input Bias Current, Sourcing (Note 2) Input Voltage Range SYMBOL VOS 5 0.
PAGE 4
Ultra-Fast Precision TTL Comparators MXL1016/MXL1116 _______________________________________________________Package Information D E DIM E1 A A1 A2 A3 B B1 C D1 E E1 e eA eB L A3 A A2 L A1 0° - 15° C e B1 eA B eB D1 Plastic DIP PLASTIC DUAL-IN-LINE PACKAGE (0.300 in.) INCHES MAX MIN 0.200 – – 0.015 0.175 0.125 0.080 0.055 0.022 0.016 0.065 0.045 0.012 0.008 0.080 0.005 0.325 0.300 0.310 0.240 – 0.100 – 0.300 0.400 – 0.150 0.115 PKG.