Owner's manual

FLYFOT-MG260-MODULE
Page: 93 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
3 Registration
4 Erasure
<type> : TON/NPI (Type of address byte in integer format) (default 145 when dialing string includes
international access code character "+", otherwise 129)
<class>
1 Voice
2 Data
4 Fax
8 Short Messages
7 All classes
Note: The combination of different classes is not supported, it will only result in
the activation / deactivation / status request of all classes.
If the FDN phonebook is activated, the registration is restricted to the phone
numbers written in it.
if <Class> parameter is not given in the command, 7 is used as default value.
<subaddr> not managed
<satype> not managed
<time> For <reason> = 2 (No reply), 4 (all calls forwarding) and 5 (all conditional call forwarding), time
to wait (1 to 30) in seconds before call is forwarded. Default value is 20.
< status >
0 : not active
1 : active
2 : quiescent
10.2 Call barring +CLCK
Description:
This command allows control of the call barring supplementary service.
Locking, unlocking or querying the status of call barring is possible for all classes or for a
specific class, but not a combination of some.
Syntax:
Command Syntax : AT+CLCK= <fac>, <mode> [, <password> [, <class> ] ]
Response Syntax
: (for <mode>=2 and command successful)
+CLCK: <status> [, <class1> [ <CR><LF>+CLCK: <status>, <class2> [… ] ]