Owner's manual

FLYFOT-MG260-MODULE

Page: 204 / 246

This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without

prior written agreement.

Barring of All Outgoing Calls. Note : Barring of All Outgoing Calls is

customer accessible.

AT+CPHS=2,7,11 +WCSP: 11,1

Note :Get the current status Barring

of Outgoing International Calls Note :Barring of Outgoing International

Calls is customer accessible.

AT+CPHS=2,7,2 +CME ERROR: 3

Note :Get the current status Call Note :CPHS Feature is not allowed

forwarding on user Busy.

AT+CPHS=0,7 OK

Note :Deactivation of CPHS Info. Note :No effect.

Defined values

<service> value indicating the field of CSP field to display (see appendix 19.15, column External Value)

0 : service is not customer-accessible

1 : service is customer-accessible

Note : The field Alternate Line Service (CPHS Teleservices Group) is used to set or not the ALS feature at

the initialisation.

18.33 FLYFOT Battery Charge Management +WBCM

Description

This specific command allows the management of the battery charging operations (start and stop

the charge, enable or disable unsolicited +WBCI Battery Charge Indications). It also sets the

battery charge parameters.

Syntax

Command syntax : AT+WBCM=<Mode>[,[<ChargeInd>][,[<BattLevelMax>],

[<BattLevelMin>],[<TPulseInCharge>],

[<TPulseOutCharge>],[<BattIntRes>]]]

Command Possible responses

AT+WBCM=0 OK

Note :Stop the battery charging.

AT+WBCM=1,1 OK

Start the battery charging withcharge

indications.