Owner's manual

FLYFOT-MG260-MODULE

Page: 202 / 246

This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without

prior written agreement.

Command Possible responses

AT+CPHS=2,5 +WNON: 0,”Orange F”

Note :Get the operator name OK

AT+CPHS=2,5,1 +WNON: 1,”Orange”

Note :Get the short format operator OK

name.

AT+CPHS=2,5,0 +CME ERROR: 3

Note :When CPHS Feature is not

allowed or format name no accessible

AT+CPHS=2,5,1 +CME ERROR: 3

Note :When NON Feature is not

allowed or format name no accessible

AT+CPHS=0,5 OK

Note :Deactivation of Network Operator Note :No effect.

Name feature.

Defined values

0 : Long format operator name

1 : Short format operator name (default value)

The name of the operator, in long or short format

18.31 FLYFOT CPHS information: +WCPI

Description

This indication provide CPHS information; ie. which data field are present in the SIM. This command

is the response to the AT+CPHS 2,6[,<data field>] command.

Syntax

Command : AT+CPHS=2,6[,<data field >]

Response syntax

: +WCPI: <data field>,<status>

Command Possible responses

AT+CPHS=2,6 +WCPI: 0,”0033000F”

Note :Get the current status for all

CPHS info field

AT+CPHS=2,6,13 +WCPI: 13,1

Note :Get the current status for Call OK