Owner's manual

FLYFOT-MG260-MODULE

Page: 185 / 246

This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without

prior written agreement.

Note : Play a DTMF tone Note : Done

AT+WDTMF=0 OK

Note : Stop playing Note : Done

AT+WDTMF=? +WDTMF: (0-1),(0-9,*,#,A-D),(0-

Note : Test command 15),(0-50)

Note : Done

AT+ WD TM F ? ERR OR

Note : Current value Note :

Defined values :

<mode>

0: Stop playing.

1: Play a DTMF tone

<dtmf> : This parameter sets the DTMF to play (mandatory if <mode>=1).

Value must be in {0-9,*,#,A-D}

<gain>: This parameter sets tone gain. The values are identical to those of the +WTONE (speaker)

command. The default value is 9.

Range of values is 0 to 15 (see array on §18.11.3)

<duration>: This parameter sets the tone duration (in unit of 100 ms).

Range of values is 0 to 50 (0 is default value, 1 -> 0,1 s., 50 -> 5 s.)

Remark

: when <duration> = 0, the duration is infinite, and the DTMF tone can be stopped by

AT+WDTMF=0.

18.14 FLYFOT Downloading +WDWL

Description :

This specific command switches the product to download mode. Downloading is performed using the

1K-XMODEM protocol.

Syntax :

Command syntax: AT+WDWL

Command Possible responses

AT+WDWL Note : Switch on downloading mode +WDWL: 0 Note : Start the downloading

…

Note : Downloading in progress

AT+CFUN=1