Owner's manual

FLYFOT-MG260-MODULE

Page: 115 / 246

This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without

prior written agreement.

Values when CmdType=10 (Send USSD)

Text information in ASCII format.

Values when CmdType=11 (Setup Event List)

<Evt>

1: Reporting asked for an ‘Idle Screen’ event.

2: Reporting asked for an ‘User Activity’ event.

3: Reporting asked for ‘Idle Screen’ and ‘User Activity’ events.

4: Cancellation of reporting event.

Rem:

For the UCS2 format texts are displayed in Hex ASCII format. Example: When the SIM sends

a TextString containing 0x00 0x41 the text displayed is “0041”.

Error codes

+ CME ERROR: 3 Operation not allowed. This error is returned when a wrong parameter

is detected.

+CME ERROR: 4 Operation not supported. This error is returned when the user wants to get

information about a SIM ToolKit proactive command (with SIM ToolKit

functionality not activated.)

+CME ERROR: 518 SIM ToolKit indication not received. This error is returned when the SIM

Toolkit indication (+STIN) has not been received.

Example

Initially, all facilities are activated, the PIN is not required and SIM toolkit functionality is activated.

AT+CMEE=1 Enable the reporting of mobile equipment errors

AT+WIND=15 Set FLYFOT indications

AT+STSF?

+STSF: 1,”5FFFFFFF7F”,3 SIM ToolKit functionality activated with all facilities.

+STIN: 0 The main menu has been sent from the SIM.

AT+ ST IN?

+STIN: 0

AT+STGI=0 Get information about the main menu

+STGI: ”SIM TOOLKIT MAIN MENU” Main menu contains 3 items.