Manual

MAX15006/MAX15007
40V, Ultra-Low Quiescent-Current
Linear Regulators in 6-Pin TDFN/8-Pin SO
_______________________________________________________________________________________ 3
Note 1: Limits at -40°C are guaranteed by design.
Note 2: Output voltage regulation is guaranteed for I
OUT
≥ 5µA.
Note 3: Dropout voltage is defined as (V
IN
- V
OUT
) when V
OUT
is 2% below the value of V
OUT
when V
IN
= V
OUT
+ 3V.
Note 4: For V
OUT
= 3.3V, the 700mV dropout indicates V
OUT
does not reach 2% below V
OUT
at V
IN
= V
OUT
+ 3V at minimum 4V
input voltage.
Note 5: Enable to regulation time is the time the output takes to reach 95% of its final value with V
IN
= 14V and EN is taken from V
IL
to V
IH
in 5ns.
ELECTRICAL CHARACTERISTICS (continued)
(V
IN
= 14V, I
OUT
= 1mA, C
IN
= 0.1µF, C
OUT
= 2.2µF, T
A
= T
J
= -40°C to +125°C, unless otherwise noted. Typical specifications are
at T
A
= +25°C.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Output Current Limit 80 350 mA
V
OUT
= 3.3V 115
Output Voltage Noise
100Hz to 100kHz, I
OUT
= 50mA, C
OUT
= 2.2µF
V
OUT
= 5V 179
µV
RMS
Power-Supply Rejection Ratio PSRR f = 100Hz, V
IN_RIPPLE
= 500mV
P-P
, I
OUT
= 50mA 66 dB
ENABLE LOGIC
V
IL
0.4
Enable Threshold Voltage
V
IH
1.4
V
Enable Threshold Hysteresis 60 mV
Enable Pulldown Current Internally pulled down to GND 0.5 µA
Enable to Regulation Time (Note 5) 0.4 2 ms
THERMAL SHUTDOWN
Thermal Shutdown T
SHDN
Junction temperature rising +165 °C
Thermal Shutdown Hysteresis T
HYST
20 °C