User guide

MAX12553
14-Bit, 65Msps, 3.3V ADC
______________________________________________________________________________________ 27
actual sampling instant. Aperture delay (t
AD
) is the time
defined between the falling edge of the sampling clock
and the instant when an actual sample is taken (Figure 4).
Aperture Jitter
Figure 4 depicts the aperture jitter (t
AJ
), which is the
sample-to-sample variation in the aperture delay.
Output Noise (n
OUT
)
The output noise (n
OUT
) parameter is similar to the ther-
mal + quantization noise parameter and is an indication
of the ADC’s overall noise performance.
No fundamental input tone is used to test for n
OUT
; INP,
INN, and COM are connected together and 1024k data
points collected. n
OUT
is computed by taking the RMS
value of the collected data points.
Overdrive Recovery Time
Overdrive recovery time is the time required for the
ADC to recover from an input transient that exceeds the
full-scale limits. The MAX12553 specifies overdrive
recovery time using an input transient that exceeds the
full-scale limits by ±10%.
REFP 1
REFN 2
COM 3
GND 4
INP 5
INN 6
GND 7
DCE 8
CLKN 9
CLKP 10
D230
D329
D428
D527
D626
D725
D824
D923
D1022
D1121
40
REFIN
39
REFOUT
38
PD
37
V
DD
36
GND
35
OV
DD
34
DAV
33
D0
32
D1
31
CLKTYP
11
V
DD
12
V
DD
13
V
DD
14
V
DD
15
GND
16
OV
DD
17
DOR
18
D13
19
D12
20
G/T
TOP VIEW
MAX12553
EXPOSED PADDLE (GND)
THIN QFN
6mm x 6mm x 0.8mm
Pin Configuration