User Manual

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

+DR - Data Compression Reporting SELINT 0 / 1 / 2

AT+DR?

Read command returns current value of <n>.

AT+DR=?

Test command returns all supported values of the parameter <n>

Reference V25ter

3.5.3.6 Break Control

3.5.3.6.1 Transmit Break To Remote - \B

\B - Transmit Break To Remote SELINT 0 / 1 / 2

AT\B

Execution command has no effect and is included only for backward

compatibility with landline modems

3.5.3.6.2 Break Handling - \K

\K - Break Handling SELINT 0

AT\K<n>

Execution command has no effect and is included only for backward

compatibility with landline modems

Parameter:

<n>

1..5

\K - Break Handling SELINT 1 / 2

AT\K[<n>]

Execution command has no effect and is included only for backward

compatibility with landline modems

Parameter:

<n>

0..5

3.5.3.6.3 Operating Mode - \N

\N - Operating Mode SELINT 0 / 1 / 2

AT\N[<n>]

Set command set the connection element to be used when data calls are

originated (see +CBST).

Parameter:

<n>

0 - transparent

1..6 - non-transparent

Note: issuing AT\N<CR> is the same as AT\N0<CR>