Owner manual

GM862-QUAD / PY Software User Guide
1vv0300747 Rev. 3 - 10/07/07
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 63 of 96
If in relative format (see VPF parameter) it is an integer:
0 to 143 – corresponding to (VP + 1) x 5 minutes
144 to 167 – corresponding to 12 hours + ((VP -143) x 30 minutes)
168 to 196 – corresponding to (VP - 166) x 1 day
197 to 255 – corresponding to (VP - 192) x 1 week
If in absolute format it is a string in the format:
"gg/MM/YY,hh:mm:ss±tz"
where
gg day of expiration (2 characters)
MM month of expiration (2 characters)
YY year of expiration (2 characters)
hh hour of expiration (2 characters)
mm minute of expiration (2 characters)
ss second of expiration (2 characters)
± sign of the time zone ( + or - )
tz time zone (2 characters)
- Protocol Identifier in numerical format:
This parameter identifies the protocol used by the receiver entity and informs the SC that the
conversion from SMS to that protocol should be done while delivering the message.
Protocol ID Conversion towards..
0 Implicit (default)
33 telex (or teletex reduced to telex
format)
34 group 3 telefax
35 group 4 telefax
36 voice telephone (i.e. conversion to
speech)
37 ERMES (European Radio Messaging
System)
38 National Paging system (known to the
SC)
39 Videotex (T.100/T.101)
40 teletex, carrier unspecified
41 teletex, in PSPDN
42 teletex, in CSPDN
43 teletex, in analog PSTN
44 teletex, in digital ISDN
45 UCI (Universal Computer Interface,
ETSI DE/PS 3 01-3)
46-47 (reserved, 2 combinations)
48 a message handling facility (known to
the SC)
49 any public X.400-based message
handling system
50 Internet Electronic Mail