User Manual

GM862-QUAD / PY Hardware User Guide
1vv0300748 Rev. 5 - 20/09/07
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 12 of 68
3.3.2 Antenna Connector
The Telit GM862-QUAD / PY includes one 50 Ohm MMCX coaxial female RF connector. On the user
application side the following connector must be used:
a) Telegärtner MMCX angle plug crimp - Order n. J01340A0121
NOTE: be very careful when connecting the Telit GM862-QUAD/PY RF connector. The RF connector can
be damaged if not connected with the proper antenna RF connector. The minimum number of
insertion cycles are recommended.