User Manual

GM862-GPS Software User Guide
1vv0300729 Rev. 5 - 05/07/07
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 79 of 120
For example:
1- Let's assume you want to list all the SMS received read that are stored. We suppose you already
have set up the device for text SMS mode as described on the previous paragraphs:
command:
AT+CMGL="REC READ"
response:
+CMGL: 5, "REC READ","[phone]"
Telit Test Message for Text Mode SMS RECEIVING.
+CMGL: 8, "REC READ","[phone]"
Telit Second Test Message for Text Mode SMS RECEIVING.
OK
In this case the SMS group was successfully read, the messages Received UNREAD were two in the
position indexes 5 & 8. The optional parameters <tooa/toda> and <length> were not shown.