User Manual

GM862-GPS Software User Guide
1vv0300729 Rev. 5 - 05/07/07
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 69 of 120
x9 ) 9 I Y i y
xA LF
2
* : J Z j z
xB + ; K k
xC , < L l
xD CR
3
- = M m
xE . > N n
xF / ? O £ o
1
- SP stands for space character
2
- LF stands for Line Feed character
3
- CR stands for Carriage Return character
For example:
1- Let's assume you want to find the IRA code for the character '&':
From the table you find:
- most significant Nibble: 2
- least significant Nibble: 6
Hence the IRA code for the '&' character is the hexadecimal 0x26.
2- Let's assume you have the IRA code 0x6B and you want to find the corresponding character:
From the table you find at the position
- most significant Nibble: 6
- least significant Nibble: B
Hence, the character corresponding to the 0x6B IRA code is 'k'.
TIP: With the command AT+CSCS is possible to select the character set; the available types
are:
“IRA” - ITU-T.50
”8859-1” - ISO 8859 Latin 1
”PCCP437” - PC character set Code Page 437.
”UCS2” - 16-bit universal multiple-octet coded character set (ISO/IEC10646)
Please refer to the AT Commands Reference Guide for the full command description