Instruction Manual

Easy Script in Python
80000ST10020a Rev.8 - 01/10/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 33 of 100
sets serial port ASC0 speed to 115200, assigning return value to b.
NOTE: in the PythonWin version pervious to TelitPy1.5.2+_V2.1.exe and Python on module version
previous to Ver6.03.000 a different syntax is implemented depending of the development environment.
For PythonWin application: SER.SetSpeed(speed) without char format parameter.
For Python installed on module: SER.set_speed(speed, char format) with char format not an optional
parameter.
2.4.8 SER.setDCD(DCD_value)
This command sets Carrier Detect (DCD) in serial port ASC0. Input parameter DCD_value is a Python
integer which is 0 if DCD is set to OFF or 1 if DCD is set to ON. It has no return value.
Example:
SER.setDCD(1)
sets DCD to ON in ASC0.
2.4.9 SER.setCTS(CTS_value)
This command sets Clear to Send (CTS) in serial port ASC0. Input parameter CTS_value is a Python
integer which is 0 if CTS is set to OFF or 1 if CTS is set to ON.
It has no return value.
Example:
SER.setCTS(1)
sets CTS to ON in ASC0.
2.4.10 SER.setDSR(DSR_value)
This command sets Data Set Ready (DSR) in serial port ASC0. Input parameter DSR_value is a
Python integer which is 0 if DSR is set to OFF or 1 if DSR is set to ON. It has no return value.
Example:
SER.setDSR(1)
sets DSR to ON in ASC0.