Instruction Manual

Easy Script in Python
80000ST10020a Rev.8 - 01/10/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 24 of 100
2.2.12 MDM.setDTR(DTR_value)
This command sets Data Terminal Ready (DTR) in AT command interface. Input parameter
DTR_value is a Python integer which is 0 if setting DTR to OFF or 1 if setting DTR to ON.
No return value.
Example:
MDM.setDTR(0)
sets DTR to OFF in AT command handling.