Instruction Manual

Easy Script in Python

80000ST10020a Rev.8 - 01/10/08

7 Document Change Log

ISSUE#0 21/03/06 Release First ISSUE#1

ISSUE#1 13/09/06 1.4 Python Implementation Description: added SPI and IIC libraries that

were missing on the graphic

2.4 MOD built-in module: added Python watchdog and power saving

mode

2.5 IIC built-in module: added note for the IIC bus clock frequency

3.9 Debug Python Script: new paragraph for GPS modules

- clarified meaning of parameter timeout for the following commands:

MDM.receive(timeout), SER.receive(timeout) and

SER.receivebyte(timeout)

ISSUE#2 16/03/07 Added new modules such as:

2.3 MDM2 built-in module

2.5 SER2 built-in module

2.10 GPS built-in module

Added new function under IIC and SPI

ISSUE#3 24/05/07 New disclaimer

Added introduction for the new modules in paragraph 1.4 and 2

Introduced new chapter with Python notes

ISSUE#4 07/09/07 Added products into applicability table

ISSUE#5 25/10/07 Added list of standard built-in functions

ISSUE#6 07/12/07 Updated memory limits chapter

Added notes for GPIO, IIC and SPI modules

ISSUE#7 19/12/07 Added new commands under GPIO module

Added new paragraph: 3.2Run AT Interface and Python at the same

time

Added buffer size for MDM and MDM2 send, read, receive commands

ISSUE#8 01/10/08 Updated new limits in NVM availability for customer’s application from

SW rel 7.03.x00

Updated version of Python package

Updated P/N list