Manual

Global Configuration Commands
Wavecom Reset +WRST
©Restricted
Page: 88 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.11.4 Parameter Storage
The <Mode> and <Delay> parameters are stored in EEPROM without using AT&W.
6.11.5 Examples
Command Responses
AT+WRST=0
Note: Disable timer
OK
AT+WRST=1,"001:03"
Note: Enable timer and set delay at 1 hour 3
minutes
OK
AT+WRST?
+WRST: 1,"001:03","001:01"
OK
Note: Timer activated to reset after 1hour and 3 minutes.,
next reset is set for 1 hour and 1 minute.
6.11.6 Notes
Caution:
The +WRST command is strictly forbidden when the user application communicates
with the Wavecom Wireless CPU
®
by using the USB serial port.