Manual

Global Configuration Commands
Commercial Feature Management +WCFM
©Restricted
Page: 77 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.7 Commercial Feature Management +WCFM
6.7.1 Description
This Wavecom proprietary command enables or disables Wavecom specific features.
Disabling a feature can be done with no restriction, but a password is required to
enable features. This command is used only on request of Wavecom
Once a feature is successfully enabled or disabled, the product needs to be reset to
take the modification into account.
6.7.2 Syntax
Action command
AT+WCFM=<mode>[,<FtrMask>[,<Password>]]
[+WCFM: <FtrMask>,<resetFlag>]
OK
Read command
None
Test command
None