Manual

Global Configuration Commands
Features Management +WFM
©Restricted
Page: 74 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
81 "NOINTERRUPT" no management of interruption
(default: 0)
83 "OFFWHENUNPLUG" off when unplug mode (default: 0)
84 "INTERRUPT" interruption for customer (default: 1)
9 "SWITCHATT" switch attenuation feature (default: 1)
A "CPHS" CPHS feature (default: 1)
B "SIMSPEEDENH" SIM speed enhancement feature
(default:1)
C "LOCA" Location feature (default: 0)
D "AMR" AMR feature (default: 1)
E "NT_6K" NIRR bit management for network
(default: 1)
<status>: feature <FtrID> status
0 disabled
1 enabled
<resetFlag>: indicate if the Wireless CPU
®
must be reset to take into account
the feature <ftrID> state change
0 The feature has not been modified since the last boot of the
product.
1 The feature has been modified since the last boot of the
product; a reset must be performed to take the modifications
into account.
6.6.4 Parameter Storage
The <status> parameter is stored in EEPROM without using AT&W.