Manual

Global Configuration Commands
Features Management +WFM
©Restricted
Page: 72 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.6 Features Management +WFM
6.6.1 Description
This Wavecom proprietary command enables or disables specific selected features.
Once a feature is successfully either enabled or disabled, the product needs to be
reset to take the modification into account.
6.6.2 Syntax
Action command
AT+WFM=<mode>[,<ftrID>]
[+WFM: <ftrID>,<status>,<resetFlag>
[+WFM: <ftrID>,<status>,<resetFlag>[…]]]
OK
Read command
None
Test command
None