Manual

APPENDIXES
Technical Appendixes
© Restricted
Page: 49 / 80
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 APPENDIXES August 23, 2007
3.1.3 Transition Diagram
This diagram sums up the transition between different modes.
3.1.4 Open AT
®
Power Processing Performance
The Open AT
®
power processing performance is evaluated thanks to a Dhrystone
Open AT
®
application. The source code of this application is extracted from "dhryansi "
Fast Standby Mode
GSM stack off
32K off
DTR up
or
use at least one device
Fast Idle Mode
GSM stack on
32K off
Slow Idle Mode
GSM stack on
32K on
AT+W32K=1
and
DTR down
and
no device used
Transfer Mode
Connected Mode
ATD*99***1#
ATH
or
NO CARRIER
ATDxxx
or
ATA
ATH
or
NO CARRIER
Slow Standby Mode
GSM stack off
32K on
Alarm Mode
ON/~OFF=1
and
AT+CPOF
ON/~OFF=1
or
Alarm wake-up
ATS0=1 or more
and
RING
ATH
or
NO CARRIER
+WBHV=1,2
and DTR down and
no device used
Yes
Yes
No
AT+CFUN=1
ON/~OFF=0
and
AT+CPOF
+WBHV=1,0
No