Manual

Global Configuration Commands
Wireless CPU
®
Behaviour Configuration +WBHV
©Restricted
Page: 68 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.5.5 Examples
Command Responses
AT+WBHV=?
+WBHV: 0,(0-1)
+WBHV: 1,(0-2)
+WBHV: 2,(0-1)
+WBHV: 3,(0-1),(0-1)
+WBHV: 4,(0-1)
+WBHV: 5,(0-1)
+WBHV: 6,(1-255)
OK
AT+WBHV=0,1
Note: Set Wireless CPU
®
response when audio
path is opened
OK
Note: Wireless CPU
®
response is sent on audio path
opened
AT+WBHV=0
Note: interrogate Wireless CPU
®
respond
mode
+WBHV: 0,1
OK
AT+WBHV=1,1
Note: Wireless CPU
®
powerless mode
OK
AT+WBHV=1
Note: interrogate Wireless CPU
®
init mode
+WBHV: 1,2
OK
AT+WBHV=2,1
Note: Wireless CPU
®
response mode on a call:
OK just after +WIND: 5,x indication
OK
AT+WBHV=2
Note: interrogate Wireless CPU
®
call respond
mode
+WBHV: 2,1
OK
AT+WBHV=3,0
Note: Deactivate ENS feature. The feature will
be deactivated after reset
OK
AT+WBHV=3,1
Note: Activate ENS feature. The feature will be
activated after reset
OK
Note: OK if STK session already open, else +CME ERROR: 3