Manual

Fax class 2 Commands
DCE Capabilities Parameters +FDCC
©Restricted
Page: 151 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
26.11.3 Parameters and Defined Values
<vr>: vertical resolution
0 normal: 98 LPI (default value)
1 fine: 196 LPI
<br>: bit rate
0 2400 bps (modem type V.27 ter)
1 4800 bps (modem type V.27 ter)
2 7200 bps (modem type V.29)
3 9600 bps (modem type V.29, V.17). (default value if
"DATA144" feature IS NOT supported)
4 12000 bps (modem type V.33, V.17)
only when product supports "DATA144" feature
5 14400 bps (modem type V.33, V.17). (default value if
"DATA144" feature IS supported)
only when product supports "DATA144" feature
<wd>: page width
0 1728 pixels in 215 mm (default value)
1 2048 pixels in 255 mm
2 2432 pixels in 303 mm
<ln>: page length
0 A4, 297 mm
1 B4, 364 mm
2 unlimited (default value)
<df>: data compression format
0 1-D modified Huffman (default value)
1 2-D modified read
2 2-D uncompressed mode
3 2-D modified modified read