Manual

Fax class 2 Commands
Capability to Receive +FCR
©Restricted
Page: 144 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
26.9 Capability to Receive +FCR
26.9.1 Description:
This commands controls the capability of the Wireless CPU
®
to accept incoming
faxes.
26.9.2 Syntax
Action command
AT+FCR=<n>
OK
Read command
AT+FCR?
<n>
OK
Test command
AT+FCR=?
(list of supported <n>s)
OK
26.9.3 Parameters and Defined Values
<n>: capability to receive mode
0 The Wireless CPU
®
will not accept incoming faxes.
1 The Wireless CPU
®
will accept incoming faxes (default value)
26.9.4 Parameter Storage
The <n> parameter is stored in EEPROM using AT&W command. The default value
can be restored using AT&F.