Manual

CPHS Commands
CPHS Command: +CPHS
©Restricted
Page: 107 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
24 CPHS Commands
24.1 CPHS Command: +CPHS
24.1.1 Description
This Wavecom proprietary command is used to activate, deactivate or interrogate a
CPHS feature (e.g. voice mail indicator, mail box number…)
It also activates the following unsolicited responses:
• +WMVI which indicates the status of the LINE 1, LINE 2, DATA or FAX
mailboxes.
• +WDCI which provides the call forwarding flags.
24.1.2 Syntax
• For <Mode>=0 or 1:
Action command
AT+CPHS=<Mode>,<FctId>
OK
• For <Mode>=2 and <FctId>=1:
Action command
AT+CPHS=<Mode>,<FctId>
+WVMI: <LineId>,<VoiceMailStatus>
[+WVMI: <LineId>,<VoiceMailStatus>[…]]
OK
• For <Mode>=2 and <FctId>=2:
Action command
AT+CPHS=<Mode>,<FctId>
+WMBN: <Lineld>,[<number>],[<type>],[<name>],<NumberStatus>
[+WMBN: <Lineld>,[<number>],[<type>],[<name>],<NumberStatus>[…]]
OK