Manual

Battery Commands
Wavecom Battery Charge Management +WBCM
©Restricted
Page: 94 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
23.2.3 Parameters and Defined Values
<mode>: requested operation
0 stop the battery charging (default).
1 start the battery charging
2 get the current battery voltage
3 set the battery charge parameters
4 choose the type of charging
<ChargeInd>: battery charge unsolicited indication mode
0 disable the battery charge unsolicited indications (default
value)
1 enable the battery charge unsolicited indications.
2 enable the extended battery charge unsolicited indications
<ChargeMode>: charging algorithm
0 NI-CD, NI-MH
1 Li-ion
2 get the charging algorithm
<BattLevelMax>: maximum level for the battery voltage in mV
When reached, the battery is considered as charged
range: 3800-4300 (default value: 4200)
<BattLevelMin>: minimum level for the battery voltage in mV
When reached, the battery is considered as
discharged and the product is turned off (with the
+CPOF command behavior)
range: 3200-3800 (default value: 3200)
<TPulseInCharge>: time in ms between pulses for the pulsed charge
range: 100-10000 (default value: 100)
< WBCITimer >: time in ms between +WBCI unsolicited responses in
or out of charge (for <ChargeInd>=1)
range: 1000-10000 (default value: 2000)
<BattIntRes>: useless