Manual

I/O Commands
Read GPIO value +WIOR
©Restricted
Page: 81 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
22.2.5 Examples
Command Responses
AT+WIOR=1
Note: Reads I/O (number 1) value
+WIOR: 0
OK
Note: GPIO number 1 is reset/low
22.2.6 Notes
By default (e.g. after a reset), the I/O ports configuration is set by the +WIOM
command.