Manual

Global Configuration Commands
Hardware Configuration +WHCNF
©Restricted
Page: 53 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
<status>: current functionality status
For <type> = 0
0 keypad is deactivated
1 keypad is activated
For <type> = 1
0 flash LED is deactivated
1 flash LED is activated
For <type> = 2
0 32 kHz clock management is deasctivated
1 32 kHz clock management is activated.
For <type> = 3
0 external SIM switch feature is deactivated
1 external SIM switch feature is activated and access to an
inserted SIM card is possible
<ResetFlag>: indicate if the Wireless CPU
®
must be reset to take into
account the functionality state change
For <type> = 1 or
<type> = 3 only
0 The functionality has not been modified since the last
boot of the product.
1 The functionality has been modified since the last boot of
the product: it has to be reset in order to take the
modification into account.
6.2.4 Parameter storage
For each kind of <type> parameter, the <mode> parameter value is stored in
EEPROM without using At&W. Default values can be restored using AT&F.