Manual

Supplementary Services Commands
Supplementary Service Notifications +CSSN
©Restricted
Page: 180 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
<code2>: service code
0 forwarded call (MT call setup)
1 closed user Group call, with CUG <index>
2 call has been put on hold (during a voice call, <number>
& <type> fields may be present)
3 call has been retrieved (during a voice call, <number> &
<type> fields may be present)
4 multiparty call entered (during a voice call, <number> &
<type> fields may be present)
5 call on hold has been released (during a voice call)
7 call is being connected (alerting) with the remote party in
alerting state in Explicit Call Transfer operation (during a
voice call)
8 call has been connected with the other remote party in
Explicit Call Transfer operation (during a voice call,
<number> & <type> fields may be present)
9 this is a deflected call (MT call setup)
10 additional incoming call forwarded
<index>: closed user group
string type
<number>: phone number
string type
<type>: TON/NPI
145 international number
<num> includes the international access code character
"+".
129 national number
<num> does not include the international access code
character "+".
20.6.4 Parameter Storage
The <n> and <m> parameters are stored in EEPROM using AT&W command. The
default value can be restored using AT&F command.